The Boxer Vinyl Patch Kit includes:
- 2 oz adhesive with dab applicator
- 130 square inches of clear vinyl
Application instructions:
All surfaces must be clean. Cut rounded corners on the patch. For inflatables and lightweight vinyl, apply adhesive sparingly to the patch and press firmly onto the surface to be repaired. Allow to dry for 24 hours. A face mask or goggles should always be used when going underwater to make repairs.
For deep underwater repairs:
Cut the rounded corners of the patch. Apply adhesive to the patch and fold it over itself. When you reach the damaged area under water, unfold the patch and immediately apply it to the liner, squeezing out any water bubbles. Do not disturb the patch for at least 48 hours. Allow 4-7 days for it to fully cure.
Warranty Coverage: Boxer plumbing products and adhesive fittings are covered by a 30-day limited manufacturer's warranty. The manufacturer warrants its plumbing products and fittings against defects in workmanship and materials. This warranty will be void if the plumbing/fitting is damaged as a result of improper installation or use, or if damage is caused by ice. The warranty does not cover labor charges, costs of water or chemical loss, or any other damage that may occur.
